NSF Certified Minghuang Siliphos, Efficiently Solving Scaling Problems in Boilers and Other Equipmen

Preparation for Applicable Scenarios: It is suitable for water treatment systems that are prone to scaling, such as boilers, central air - conditioning circulating water systems, heat exchangers, and pipelines. Before use, it is necessary to ensure that the interior of the system is clean, without a large amount of sludge or impurity accumulation. If necessary, the system can be cleaned first.

Determination of Dosage: The dosage is determined according to the water capacity of the system and the water hardness. Under normal circumstances, 5 - 10 grams of phosphate solid scale inhibitor is added per ton of water. When the water hardness is relatively high, the dosage can be appropriately increased, but it should not exceed 15 grams per ton of water.

Dosing Method: The scale inhibitor can be directly put into the dosing tank or water tank of the system, or it can be put in at a constant speed through a dosing device. If it is in the form of solid particles, it can be put in directly; if it is in block form, it can be crushed as needed before putting in to accelerate the dissolution rate.

Dissolution and Circulation: After putting in the inhibitor, turn on the system circulating water pump to make the scale inhibitor fully dissolve and evenly disperse in the water. Circulate for 1 - 2 hours to ensure that the agent is fully mixed with the water.

Regular Supplement: According to the operation of the system and the results of water quality testing, supplement the scale inhibitor regularly. Generally, the concentration of the agent in the water is tested once every 1 - 2 weeks. When the concentration is lower than the specified standard, it is timely added to the appropriate dosage.

Significant Scale Inhibition Effect: It can effectively inhibit the formation of scale by calcium and magnesium ions in water, prevent the deposition of scale such as calcium carbonate and calcium sulfate on the surface of equipment, keep the heat exchange surface of the equipment clean, improve the heat exchange efficiency, and reduce energy consumption.

Prolonging Equipment Service Life: It reduces the corrosion and wear of equipment caused by scale, avoids equipment failures caused by scaling, prolongs the service life of equipment such as boilers and heat exchangers, and reduces maintenance costs.

Long - lasting Effect: Under normal use and regular supplement, one dose can maintain an effective scale inhibition effect for 1 - 3 months. The specific duration depends on factors such as water quality and system operation load.

Environmental Protection and Safety: It meets relevant environmental protection standards, causes no secondary pollution to water bodies and equipment, and does not affect the normal use of water quality (such as boiler water, circulating water, etc.).

Wide Application Range: It can play a good scale inhibition role in industrial circulating water systems, heating systems, domestic hot water systems, etc., with strong applicability.